C&I Energy Storage Solutions

LiFePO₄ (Lithium Iron Phosphate), chosen for high safety, long cycle life (>6000 cycles), and thermal stability.

Modular racks and cabinets from 100kWh to multi-MWh. Typical configurations include 215kWh/372kWh cabinets, scalable to >2MWh per site.

Peak shaving, demand charge reduction, solar/wind integration, backup power, and microgrids.

Compatible with most PCS (Power Conversion Systems) supporting LiFePO₄ batteries, via CAN/Modbus/RS485 protocols.

Yes. Designed for hybrid integration with PV inverters, wind systems, and gensets, for both on-grid and off-grid use.

Depends on PCS size. Example: A 372kWh cabinet with a 124kW PCS charges from 0–100% in ~3 hours.

Yes. Cabinets can be paralleled to build >10MWh systems. Central EMS (Energy Management System) coordinates operation.

Options include outdoor containerized systems (20ft/40ft) with HVAC, or indoor racks with fire suppression.

Factories: peak shaving 1–2MW loads. Commercial centers: backup for elevators/HVAC. Renewable plants: smooth solar/wind fluctuations.

Preventive inspection every 6 months. EMS can run remote diagnostics and predictive maintenance.

10–15 years under standard operating conditions (25°C, ≤0.5C rate).

Yes. Modules and racks are hot-swappable, minimizing downtime.

Each cabinet integrates BMS, HVAC, fire detection, and optional aerosol/fire suppression. UL9540A tested.

Yes. Designed to meet IEEE 1547, UL 9540/1973, NFPA 855, and local utility interconnection standards.

10 years or 6000 cycles, whichever comes first. Extended service contracts available.

Contact AmpGarden with project details, MAC codes, and EMS/PCS logs. Remote support and on-site service available.